3x3mm 60g Self adhesive Fiberglass Mesh Tape for Construction Drywall Joint
- Product Description:
Fiberglass Mesh Tape is cut by alkali resistant fiberglass mesh which is treated by adhesive latex. It has excellent self adhesive, so it is widely used in wall surface reinforcement in the building preventing from wall cracks and ceiling cracks.
In our daily life, we will see that the corners or places on the walls will be white, which means that the alkalinity is stronger, and the surface will fall off after a long time, which will affect the aesthetics. Moreover, the mortar used for the external wall insulation construction is also alkaline, so the material for preventing the insulation layer from cracking must have a certain alkali resistance. During the construction, the mortar will firmly bond the 9*9 Mesh Fiberglass Drywall Joint Tape and the insulation layer, and the longer the time, the stronger. When the house is demolished, it will be found that the insulation layer with the mesh cloth can lift very heavy cement block.
1.Mesh size: 2.85mm x 2.85mm(9 x 9 mesh/inch),
2.3.0mm x 3.0mm (8 x 8 mesh/inch)
4.Width: general width is 50mm
Also we are able to supply 150mm, 100mm, 35mm, etc.
5.Length: 25m, 45m, 60m,90m, etc.
6.Color: white , yellow, green,
7.Packing: each roll with shrink packing,then in carton
Application for 9*9 Mesh Fiberglass Drywall Joint Tape
1) wall reinforcing material (such as fiberglass mesh wall, GRC wall panels, inner EPS wall insulation board, gypsum board.
2) reinforced cement products (such as Roman column, flue etc.)
3) granite, mosaic dedicated mesh, marble backing net.
4) waterproofing membrane cloth, asphalt roofing.
5) reinforced plastics, rubber reinforcing materials.
Roll size packing based on 20ft container:
4.100mm*45m,27 rolls/carton—672 cartons